Keysight Technologies InfiniiVision 4000 X Series User Manual

1012 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
31 :SBUS<n> Commands
:SBUS<n>:MANChester:TOLerance
(see page 1610)
Command Syntax
:SBUS<n>:MANChester:TOLerance <percent>
<percent> ::= from 5-30, in NR1 format
The :SBUS<n>:MANChester:TOLerance command specifies the tolerance for the
Manchester signal in terms of the percentage of the bit period.
Query Syntax
:SBUS<n>:MANChester:TOLerance?
The :SBUS<n>:MANChester:TOLerance? query returns the tolerance setting.
Return Format
<percent><NL>
<percent> ::= from 5-30, in NR1 format
See Also • ":SBUS<n>:MANChester:BAUDrate" on page 1002
• ":SBUS<n>:MANChester:SOURce" on page 1009

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English