Keysight Technologies InfiniiVision 4000 X Series User Manual

1194 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
32 :SEARch Commands
:SEARch:SERial:CAN:SYMBolic:SIGNal
(see page 1610)
Command Syntax
:SEARch:SERial:CAN:SYMBolic:SIGNal <name>
<name> ::= quoted ASCII string
The :SEARch:SERial:CAN:SYMBolic:SIGNal command specifies the signal to
search for when CAN symbolic data has been loaded (recalled) into the
oscilloscope and the CAN serial search mode is set to MSIGnal.
Query Syntax
:SEARch:SERial:CAN:SYMBolic:SIGNal?
The :SEARch:SERial:CAN:SYMBolic:SIGNal? query returns the specified signal.
Return Format
<name><NL>
<name> ::= quoted ASCII string
See Also • ":RECall:DBC[:STARt]" on page 813
• ":SEARch:SERial:CAN:MODE" on page 1187
• ":SEARch:SERial:CAN:SYMBolic:MESSage" on page 1193
• ":SEARch:SERial:CAN:SYMBolic:VALue" on page 1195

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English