Keysight Technologies InfiniiVision 4000 X Series User Manual

:CHANnel<n> Commands 11
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 351
:CHANnel<n>:INVert
(see page 1610)
Command Syntax
:CHANnel<n>:INVert <invert value>
<invert value> ::= {{1 | ON} | {0 | OFF}
<n> ::= 1 to (# analog channels) in NR1 format
The :CHANnel<n>:INVert command selects whether or not to invert the input
signal for the specified channel. The inversion may be 1 (ON/inverted) or 0
(OFF/not inverted).
Query Syntax
:CHANnel<n>:INVert?
The :CHANnel<n>:INVert? query returns the current state of the channel inversion.
Return Format
<invert value><NL>
<invert value> ::= {0 | 1}
See Also • "Introduction to :CHANnel<n> Commands" on page 345

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English