Keysight Technologies InfiniiVision 4000 X Series User Manual

476 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
20 :FUNCtion<m> Commands
:FUNCtion<m>[:FFT]:GATE
(see page 1610)
Command Syntax
:FUNCtion<m>[:FFT]:GATE <gating>
<m> ::= 1-4 in NR1 format
<gating> ::= {NONE | ZOOM}
The :FUNCtion<m>[:FFT]:GATE command specifies whether the FFT is performed
on the Main time base window (NONE) or the ZOOM window when the zoomed
time base is displayed.
Query Syntax
:FUNCtion<m>[:FFT]:GATE?
The :FUNCtion<m>[:FFT]:GATE? query returns the gate setting.
Return Format
<gating><NL>
<gating> ::= {NONE | ZOOM}
See Also • ":FUNCtion<m>[:FFT]:VTYPe" on page 482
• ":FUNCtion<m>[:FFT]:WINDow" on page 483
• "Introduction to :FUNCtion<m> Commands" on page 460
• ":FUNCtion<m>:OPERation" on page 490

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English