Keysight Technologies InfiniiVision 4000 X Series

784 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
28 :POWer Commands
:POWer:SIGNals:DURation:TRANsient
(see page 1610)
Command Syntax
:POWer:SIGNals:DURation:TRANsient <value>[suffix]
<value> ::= value in NR3 format
[suffix] ::= {s | ms | us | ns}
The :POWer:SIGNals:DURation:TRANsient command specifies the duration of the
transient response analysis.
Query Syntax
:POWer:SIGNals:DURation:TRANsient?
The :POWer:SIGNals:DURation:TRANsient query returns the set duration time
value.
Return Format
<value><NL>
<value> ::= value in NR3 format
See Also • ":POWer:TRANsient:APPLy" on page 803
• ":POWer:SIGNals:AUTosetup" on page 776
• ":POWer:SIGNals:IEXPected" on page 785
• ":POWer:SIGNals:OVERshoot" on page 786
• ":POWer:SIGNals:VSTeady:TRANsient" on page 792
• ":POWer:SIGNals:SOURce:CURRent<i>" on page 793
• ":POWer:SIGNals:SOURce:VOLTage<i>" on page 794