Keysight Technologies InfiniiVision 4000 X Series User Manual

:SEARch Commands 32
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1213
:SEARch:SERial:IIC:PATTern:DATA2
(see page 1610)
Command Syntax
:SEARch:SERial:IIC:PATTern:DATA2 <value>
<value> ::= integer or <string>
<string> ::= "0xnn" n ::= {0,..,9 | A,..,F}
The :SEARch:SERial:IIC:PATTern:DATA2 command specifies the second data value
when searching for IIC events with two data values.
To set don't care values, use the integer -1.
Query Syntax
:SEARch:SERial:IIC:PATTern:DATA2?
The :SEARch:SERial:IIC:PATTern:DATA2? query returns the current second data
value setting.
Return Format
<value><NL>
<value> ::= integer
See Also • Chapter 32, “:SEARch Commands,” starting on page 1149
• ":SEARch:SERial:IIC:MODE" on page 1209
• ":SEARch:SERial:IIC:PATTern:DATA" on page 1212

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English