1026 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
31 :SBUS<n> Commands
:SBUS<n>:NRZ:HSIZe
(see page 1610)
Command Syntax
:SBUS<n>:NRZ:HSIZe <#bits>
<#bits> ::= from 0-32, in NR1 format
When the display format is WORD (see :SBUS<n>:NRZ:DISPlay), the
:SBUS<n>:NRZ:HSIZe command specifies the number of bits in the header field of
your NRZ protocol definition.
Query Syntax
:SBUS<n>:NRZ:HSIZe?
The :SBUS<n>:NRZ:HSIZe? query returns the number of header field bits setting.
Return Format
<#bits><NL>
See Also • ":SBUS<n>:NRZ:DISPlay" on page 1023
• ":SBUS<n>:NRZ:DSIZe" on page 1024
• ":SBUS<n>:NRZ:FSIZe" on page 1025
• ":SBUS<n>:NRZ:STARt" on page 1031
• ":SBUS<n>:NRZ:TSIZe" on page 1035
• ":SBUS<n>:NRZ:WSIZe" on page 1036
To Next Page
Loading...
