Keysight Technologies InfiniiVision 4000 X Series User Manual

:SBUS<n> Commands 31
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 921
:SBUS<n>:CXPI:TRIGger:PATTern:INFO:CT
(see page 1610)
Command Syntax
:SBUS<n>:CXPI:TRIGger:PATTern:INFO:CT <string>
<string> ::= "nn" where n ::= {0 | 1 | X}
The command ...
For the trigger types that let you trigger on data, as well as frame ID and frame
information bits, the :SBUS<n>:CXPI:TRIGger:PATTern:INFO:CT command lets you
specify the Count (CT) value of the CXPI frame you wish to trigger on. This is a
two-bit binary value.
Query Syntax
:SBUS<n>:CXPI:TRIGger:PATTern:INFO:CT?
The :SBUS<n>:CXPI:TRIGger:PATTern:INFO:CT? query returns the specified CT bits
included in the trigger.
Return Format
<string><NL>
<string> ::= "nn" where n ::= {0 | 1 | X}
See Also • ":SBUS<n>:CXPI:TRIGger" on page 913
• ":SBUS<n>:CXPI:TRIGger:IDFilter" on page 915
• ":SBUS<n>:CXPI:TRIGger:PTYPe" on page 916
• ":SBUS<n>:CXPI:TRIGger:PATTern:DATA" on page 917
• ":SBUS<n>:CXPI:TRIGger:PATTern:DATA:LENGth" on page 918
• ":SBUS<n>:CXPI:TRIGger:PATTern:DATA:STARt" on page 919
• ":SBUS<n>:CXPI:TRIGger:PATTern:ID" on page 920
• ":SBUS<n>:CXPI:TRIGger:PATTern:INFO:DLC" on page 922
• ":SBUS<n>:CXPI:TRIGger:PATTern:INFO:NM" on page 923

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English