742 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
28 :POWer Commands
:POWer:HARMonics:RPOWer:USER
(see page 1610)
Command Syntax
:POWer:HARMonics:RPOWer:USER <value>
<value> ::= Watts from 1.0 to 600.0 in NR3 format
When Class D is selected as the current harmonics analysis standard and you have
chosen to use a user-defined Real Power value (see :POWer:HARMonics:RPOWer),
the :POWer:HARMonics:RPOWer:USER command specifies the Real Power value
used in the current-per-watt measurement.
Query Syntax
:POWer:HARMonics:RPOWer:USER?
The :POWer:HARMonics:RPOWer:USER? query returns the user-defined Real
Power value.
Return Format
<value><NL>
<value> ::= Watts from 1.0 to 600.0 in NR3 format
See Also • ":POWer:HARMonics:STANdard" on page 744
• ":POWer:HARMonics:RPOWer" on page 741
To Next Page
Loading...
