Keysight Technologies InfiniiVision 4000 X Series User Manual

:SBUS<n> Commands 31
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1033
:SBUS<n>:NRZ:TRIGger:PATTern:VALue:DATA
(see page 1610)
Command Syntax
:SBUS<n>:NRZ:TRIGger:PATTern:VALue:DATA <string>
<string> ::= "nn...n" where n ::= {0 |1|X|$}
<string ::= "0xnn...n" where n ::= {0,..,9 | A,..,F | X | $}
When the VALue trigger mode is selected (:SBUS<n>:NRZ:TRIGger), the
:SBUS<n>:NRZ:TRIGger:PATTern:VALue:DATA command specifies the value to
trigger on.
Note that the trigger value bit order is always for bits as they arrive (that is, MSB
first) regardless of the serial decode bit order setting (in :SBUS<n>:NRZ:BITorder).
The bit width (length) of the value is set with the
:SBUS<n>:NRZ:TRIGger:PATTern:VALue:WIDTh command.
Query Syntax
:SBUS<n>:NRZ:TRIGger:PATTern:VALue:DATA?
The :SBUS<n>:NRZ:TRIGger:PATTern:VALue:DATA? query returns the specified
trigger value as a string of binary digits.
Return Format
<string><NL>
<string> ::= "nn...n" where n ::= {0 |1|X|$}
See Also • ":SBUS<n>:NRZ:BITorder" on page 1022
• ":SBUS<n>:NRZ:TRIGger" on page 1032
• ":SBUS<n>:NRZ:TRIGger:PATTern:VALue:WIDTh" on page 1034

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English