Keysight Technologies InfiniiVision 4000 X Series User Manual

:SBUS<n> Commands 31
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 947
:SBUS<n>:I2S:BASE
(see page 1610)
Command Syntax
:SBUS<n>:I2S:BASE <base>
<base> ::= {DECimal | HEX}
The :SBUS<n>:I2S:BASE command determines the base to use for the I2S decode
display.
Query Syntax
:SBUS<n>:I2S:BASE?
The :SBUS<n>:I2S:BASE? query returns the current I2S display decode base.
Return Format
<base><NL>
<base> ::= {DECimal | HEX}
Errors • "-241, Hardware missing" on page 1551
See Also • "Introduction to :SBUS<n> Commands" on page 853
• ":SBUS<n>:I2S Commands" on page 943

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English