Keysight Technologies InfiniiVision 4000 X Series

1252 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
32 :SEARch Commands
:SEARch:SERial:USB:PID:DATA
(see page 1610)
Command Syntax
:SEARch:SERial:USB:PID:DATA <pid>
<pid> ::= {DATA0 | DATA1 | DATA2 | MDATa}
The :SEARch:SERial:USB:PID:DATA command specifies the USB data PID to find.
The DATA USB search mode can be selected using the :SEARch:SERial:USB:MODE
command.
Query Syntax
:SEARch:SERial:USB:PID:DATA?
The :SEARch:SERial:USB:PID:DATA? query returns the specified data PID.
Return Format
<pid><NL>
<pid> ::= {DATA0 | DATA1 | DATA2 | MDAT}
See Also • ":SEARch:SERial:USB:MODE" on page 1243