Keysight Technologies InfiniiVision 4000 X Series User Manual

886 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
31 :SBUS<n> Commands
:SBUS<n>:CAN:DISPlay
(see page 1610)
Command Syntax
:SBUS<n>:CAN:DISPlay <type>
<type> ::= {HEXadecimal | SYMBolic}
The :SBUS<n>:CAN:DISPlay command specifies, when CAN symbolic data is
loaded into the oscilloscope, whether symbolic values (from the DBC file) or
hexadecimal values are displayed in the decode waveform and the Lister window.
Query Syntax
:SBUS<n>:CAN:DISPlay?
The :SBUS<n>:CAN:DISPlay? query returns the CAN decode display type.
Return Format
<type><NL>
<type> ::= {HEX | SYMB}
See Also • ":RECall:DBC[:STARt]" on page 813

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English