Keysight Technologies InfiniiVision 4000 X Series

:SBUS<n> Commands 31
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1147
:SBUS<n>:USBPd:TRIGger:HEADer:VALue
(see page 1610)
Command Syntax
:SBUS<n>:USBPd:TRIGger:HEADer:VALue <string>
<string> ::= "nn...n" where n ::= {0 |1|X}
<string ::= "0xnn...n" where n ::= {0,..,9 | A,..,F | X}
When the Header Content trigger mode is selected (with the
":SBUS<n>:USBPd:TRIGger HEADer" command) and the user-defined Value type
is selected (with the ":SBUS<n>:USBPd:TRIGger:HEADer VALue" command), the
:SBUS<n>:USBPd:TRIGger:HEADer:VALue command specifies the user-defined
header value.
Query Syntax
:SBUS<n>:USBPd:TRIGger:HEADer:VALue?
The :SBUS<n>:USBPd:TRIGger:HEADer:VALue? query returns the specified
user-defined header value.
Returned data values are always quoted binary format strings.
Return Format
<string><NL>
<string> ::= "nn...n" where n ::= {0 |1|X}
See Also • ":SBUS<n>:USBPd:SOURce" on page 1138
• ":SBUS<n>:USBPd:TRIGger" on page 1139
• ":SBUS<n>:USBPd:TRIGger:HEADer" on page 1140
• ":SBUS<n>:USBPd:TRIGger:HEADer:CMESsage" on page 1142
• ":SBUS<n>:USBPd:TRIGger:HEADer:DMESsage" on page 1144
• ":SBUS<n>:USBPd:TRIGger:HEADer:EMESsage" on page 1145
• ":SBUS<n>:USBPd:TRIGger:HEADer:QUALifier" on page 1148