994 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
31 :SBUS<n> Commands
:SBUS<n>:M1553:BASE
(see page 1610)
Command Syntax
:SBUS<n>:M1553:BASE <base>
<base> ::= {BINary | HEX}
The :SBUS<n>:M1553:BASE command determines the base to use for the
MIL-STD-1553 decode display.
Query Syntax
:SBUS<n>:M1553:BASE?
The :SBUS<n>:M1553:BASE? query returns the current MIL-STD-1553 display
decode base.
Return Format
<base><NL>
<base> ::= {BIN | HEX}
Errors • "-241, Hardware missing" on page 1551
See Also • "Introduction to :SBUS<n> Commands" on page 853
• ":SBUS<n>:M1553 Commands" on page 992
To Next Page
Loading...
