Keysight Technologies InfiniiVision 4000 X Series User Manual

60 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
1 What's New
What's New in Version 3.10
New features in version 3.10 of the InfiniiVision 4000 X-Series oscilloscope
software are:
• The license-enabled USB 2.0 signal quality analysis application.
• Support for the N2820A high-sensitivity current probe.
• Saving Multi Channel Waveform data (*.h5) format files that can be opened by
the N8900A InfiniiView oscilloscope analysis software.
More detailed descriptions of the new and changed commands appear below.
New Commands
Command Description
:COMPliance Commands (see
page 367)
Commands for controlling the optional license-enabled USB 2.0
signal quality analysis feature.
:MEASure:DUAL:CHARge (see
page 583)
These are special measurements available with the N2820A high
sensitivity current probe when both the Primary and Secondary
probe cables are used.
These measurements join the Zoom In waveform data below the
probe's clamp level with Zoom Out waveform data above the
probe's clamp level to create the waveform on which the
measurement is made.
:MEASure:DUAL:VAMPlitude
(see page 584)
:MEASure:DUAL:VAVerage (see
page 585)
:MEASure:DUAL:VBASe (see
page 586)
:MEASure:DUAL:VPP (see
page 587)
:MEASure:DUAL:VRMS (see
page 588)
:SAVE:COMPliance:USB[:STARt
] (see page 826)
Lets you save USB 2.0 signal quality test results.
:SAVE:MULTi[:STARt] (see
page 835)
Lets you save Multi Channel Waveform data (*.h5) format files
that can be opened by the N8900A InfiniiView oscilloscope
analysis software.
:TRIGger:LEVel:ASETup (see
page 1305)
Sets the trigger levels of all displayed analog channels to their
waveforms' 50% values.

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English