Keysight Technologies InfiniiVision 4000 X Series User Manual

What's New 1
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 59
Changed
Commands
:SEARch:SERial:CAN:SYMBolic:
SIGNal (see page 1194)
Specifies signal to search for when CAN symbolic data has been
loaded (recalled) into the oscilloscope and the CAN serial search
mode is set to MSIGnal.
:SEARch:SERial:CAN:SYMBolic:
VALue (see page 1195)
Specifies signal value to search for when CAN symbolic data has
been loaded (recalled) into the oscilloscope and the CAN serial
search mode is set to MSIGnal.
Command Description
Command Differences
:SBUS<n>:CAN:TRIGger (see
page 894)
You can now trigger on symbolic messages (with parameter
MESSage) or messages and signal values (with parameter
MSIGnal).
:SBUS<n>:LIN:TRIGger (see
page 982)
You can now trigger on parity errors (with parameter PARityerror)
or checksum errors (with parameter CSUMerror).
:SEARch:SERial:CAN:MODE
(see page 1187)
You can now search for symbolic messages (with parameter
MESSage) or messages and signal values (with parameter
MSIGnal).

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English