Keysight Technologies InfiniiVision 4000 X Series User Manual

:SBUS<n> Commands 31
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1001
:SBUS<n>:MANChester:BASE
(see page 1610)
Command Syntax
:SBUS<n>:MANChester:BASE <base>
<base> ::= {HEX | DECimal | ASCii | BINary}
When the display format is WORD (see :SBUS<n>:MANChester:DISPlay), the
:SBUS<n>:MANChester:BASE command specifies the base for the Manchester bus
decode and Lister display.
•HEX — hexadecimal
• DECimal — unsigned decimal
• ASCii
When the display format is BIT, the only legal decode base value is BINary.
Query Syntax
:SBUS<n>:MANChester:BASE?
The :SBUS<n>:MANChester:BASE? query returns the decode number base setting.
Return Format
<base><NL>
<base> ::= {HEX | DEC | ASC | BIN}
See Also • ":SBUS<n>:MANChester:BITorder" on page 1003
• ":SBUS<n>:MANChester:IDLE:BITS" on page 1007
• ":SBUS<n>:MANChester:LOGic" on page 1008
• ":SBUS<n>:MANChester:STARt" on page 1011

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English