:MTESt Commands 26
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 677
:MTESt:COUNt:RESet
(see page 1610)
Command Syntax
:MTESt:COUNt:RESet
The :MTESt:COUNt:RESet command resets the mask statistics.
See Also • "Introduction to :MTESt Commands" on page 667
• ":MTESt:COUNt:WAVeforms" on page 679
• ":MTESt:COUNt:FWAVeforms" on page 676
• ":MTESt:COUNt:TIME" on page 678
To Next Page
Loading...
