Keysight Technologies InfiniiVision 4000 X Series User Manual

:TIMebase Commands 34
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1293
:TIMebase:WINDow:SCALe
(see page 1610)
Command Syntax
:TIMebase:WINDow:SCALe <scale_value>
<scale_value> ::= scale value in seconds in NR3 format
The :TIMebase:WINDow:SCALe command sets the zoomed (delayed) window
horizontal scale (seconds/division). The main sweep scale determines the range
for this command. The maximum value is one half of the :TIMebase:SCALe value.
Query Syntax
:TIMebase:WINDow:SCALe?
The :TIMebase:WINDow:SCALe? query returns the current zoomed window scale
setting.
Return Format
<scale_value><NL>
<scale_value> ::= current seconds per division for the zoomed window
See Also • "Introduction to :TIMebase Commands" on page 1282
• ":TIMebase:RANGe" on page 1285
• ":TIMebase:POSition" on page 1284
• ":TIMebase:SCALe" on page 1289
• ":TIMebase:WINDow:RANGe" on page 1292

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English