Keysight Technologies InfiniiVision 4000 X Series User Manual

:SEARch Commands 32
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1199
:SEARch:SERial:FLEXray:DATA:LENGth
(see page 1610)
Command Syntax
:SEARch:SERial:FLEXray:DATA:LENGth <length>
<length> ::= integer from 1 to 12 in NR1 format
The :SEARch:SERial:FLEXray:DATA:LENGth command specifies the length of data
values when searching for FlexRay frames.
The data value is specified using the :SEARch:SERial:FLEXray:DATA command.
Query Syntax
:SEARch:SERial:FLEXray:DATA:LENGth?
The :SEARch:SERial:FLEXray:DATA:LENGth? query returns the current data length
setting.
Return Format
<length><NL>
<length> ::= integer from 1 to 12 in NR1 format
See Also • Chapter 32, “:SEARch Commands,” starting on page 1149
• ":SEARch:SERial:FLEXray:MODE" on page 1201
• ":SEARch:SERial:FLEXray:DATA" on page 1198

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English