Keysight Technologies InfiniiVision 4000 X Series User Manual

:WGEN<w> Commands 37
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1451
:WGEN<w>:FUNCtion:RAMP:SYMMetry
(see page 1610)
Command Syntax
:WGEN<w>:FUNCtion:RAMP:SYMMetry <percent>
<w> ::= 1 to (# WaveGen outputs) in NR1 format
<percent> ::= symmetry percentage from 0% to 100% in NR1 format
For Ramp waveforms, the :WGEN<w>:FUNCtion:RAMP:SYMMetry command
specifies the symmetry of the waveform.
Symmetry represents the amount of time per cycle that the ramp waveform is
rising.
Query Syntax
:WGEN<w>:FUNCtion:RAMP:SYMMetry?
The :WGEN<w>:FUNCtion:RAMP:SYMMetry? query returns the currently set ramp
symmetry.
Return Format
<percent><NL>
<percent> ::= symmetry percentage from 0% to 100% in NR1 format
See Also • "Introduction to :WGEN<w> Commands" on page 1435
• ":WGEN<w>:FUNCtion" on page 1446

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English