770 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
28 :POWer Commands
:POWer:PSRR:TRACe
(see page 1610)
Command Syntax
:POWer:PSRR:TRACe <selection>
<selection> ::= {NONE | GAIN}
The :POWer:PSRR:TRACe command specifies whether to include gain (PSRR) data
in the power supply rejection ratio analysis results.
Query Syntax
:POWer:PSRR:TRACe?
The :POWer:PSRR:TRACe? query returns the type of data that is currently included
in the PSRR analysis results, or "NONE" if the gain data is not included.
Return Format
<selection_list><NL>
<selection_list> ::= {"NONE" | "GAIN"}
See Also • ":POWer:PSRR:APPLy" on page 761
• ":POWer:PSRR:DATA" on page 762
This command affects the oscilloscope's front panel graphical user interface (plot and table)
as well as when saving analysis data.
To Next Page
Loading...
