Keysight Technologies InfiniiVision 4000 X Series User Manual

786 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
28 :POWer Commands
:POWer:SIGNals:OVERshoot
(see page 1610)
Command Syntax
:POWer:SIGNals:OVERshoot <percent>
<percent> ::= percent of overshoot value in NR1 format
The :POWer:SIGNals:OVERshoot command specifies the percent of overshoot of
the output voltage. This value is used to determine the settling band value for the
transient response and to adjust the vertical scale of the oscilloscope.
Query Syntax
:POWer:SIGNals:OVERshoot?
The :POWer:SIGNals:OVERshoot query returns the overshoot percent setting.
Return Format
<percent><NL>
<percent> ::= percent of overshoot value in NR1 format
See Also • ":POWer:TRANsient:APPLy" on page 803
• ":POWer:SIGNals:AUTosetup" on page 776
• ":POWer:SIGNals:DURation:TRANsient" on page 784
• ":POWer:SIGNals:IEXPected" on page 785
• ":POWer:SIGNals:VSTeady:TRANsient" on page 792
• ":POWer:SIGNals:SOURce:CURRent<i>" on page 793
• ":POWer:SIGNals:SOURce:VOLTage<i>" on page 794

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English