1164 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
32 :SEARch Commands
:SEARch:GLITch:SOURce
(see page 1610)
Command Syntax
:SEARch:GLITch:SOURce <source>
<source> ::= CHANnel<n>
<n> ::= 1 to (# analog channels) in NR1 format
The :SEARch:GLITch:SOURce command selects the channel on which to search for
glitches (pulse widths).
Query Syntax
:SEARch:GLITch:SOURce?
The :SEARch:GLITch:SOURce? query returns the current pulse width source.
If all channels are off, the query returns "NONE."
Return Format
<source><NL>
See Also • Chapter 32, “:SEARch Commands,” starting on page 1149
• Chapter 32, “:SEARch Commands,” starting on page 1149
• ":SEARch:MODE" on page 1153
• ":SEARch:GLITch:POLarity" on page 1161
• ":SEARch:GLITch:QUALifier" on page 1162
• ":SEARch:GLITch:RANGe" on page 1163
To Next Page
Loading...
