1176 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
32 :SEARch Commands
:SEARch:TRANsition:QUALifier
(see page 1610)
Command Syntax
:SEARch:TRANsition:QUALifier <qualifier>
<qualifier> ::= {GREaterthan | LESSthan}
The :SEARch:TRANsition:QUALifier command specifies whether to search for edge
transitions greater than or less than a time.
Query Syntax
:SEARch:TRANsition:QUALifier?
The :SEARch:TRANsition:QUALifier? query returns the current transition search
qualifier.
Return Format
<qualifier><NL>
<qualifier> ::= {GRE | LESS}
See Also • Chapter 32, “:SEARch Commands,” starting on page 1149
• ":SEARch:MODE" on page 1153
• ":SEARch:TRANsition:TIME" on page 1179
To Next Page
Loading...
