1440 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
37 :WGEN<w> Commands
:WGEN<w>:ARBitrary:DATA:ATTRibute:POINts
(see page 1610)
Query Syntax
:WGEN<w>:ARBitrary:DATA:ATTRibute:POINts?
<w> ::= 1 to (# WaveGen outputs) in NR1 format
The :WGEN<w>:ARBitrary:DATA:ATTRibute:POINts query returns the number of
points used by the current arbitrary waveform.
Return Format
<points> ::= number of points in NR1 format
See Also • ":WGEN<w>:ARBitrary:DATA" on page 1437
• ":WGEN<w>:ARBitrary:DATA:DAC" on page 1442
• ":SAVE:ARBitrary[:STARt]" on page 825
• ":RECall:ARBitrary[:STARt]" on page 812
To Next Page
Loading...
