Commands Quick Reference 5
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 119
:FUNCtion<m>[:FFT]:VT
YPe <units> (see
page 482)
:FUNCtion<m>[:FFT]:VT
YPe? (see page 482)
<units> ::= {DECibel | VRMS} for
the FFT (magnitude) operation
<units> ::= {DEGRees | RADians}
for the FFTPhase operation
<m> ::= 1 to (# math functions)
in NR1 format
:FUNCtion<m>[:FFT]:WI
NDow <window> (see
page 483)
:FUNCtion<m>[:FFT]:WI
NDow? (see page 483)
<window> ::= {RECTangular |
HANNing | FLATtop | BHARris |
BARTlett}
<m> ::= 1 to (# math functions)
in NR1 format
:FUNCtion<m>:FREQuenc
y:HIGHpass <3dB_freq>
(see page 484)
:FUNCtion<m>:FREQuenc
y:HIGHpass? (see
page 484)
<3dB_freq> ::= 3dB cutoff
frequency value in NR3 format
<m> ::= 1 to (# math functions)
in NR1 format
:FUNCtion<m>:FREQuenc
y:LOWPass <3dB_freq>
(see page 485)
:FUNCtion<m>:FREQuenc
y:LOWPass? (see
page 485)
<3dB_freq> ::= 3dB cutoff
frequency value in NR3 format
<m> ::= 1 to (# math functions)
in NR1 format
:FUNCtion<m>:INTegrat
e:IOFFset
<input_offset> (see
page 486)
:FUNCtion<m>:INTegrat
e:IOFFset? (see
page 486)
<input_offset> ::= DC offset
correction in NR3 format.
<m> ::= 1 to (# math functions)
in NR1 format
:FUNCtion<m>:LINear:G
AIN <value> (see
page 487)
:FUNCtion<m>:LINear:G
AIN? (see page 487)
<value> ::= 'A' in Ax + B, value
in NR3 format
<m> ::= 1 to (# math functions)
in NR1 format
:FUNCtion<m>:LINear:O
FFSet <value> (see
page 488)
:FUNCtion<m>:LINear:O
FFSet? (see page 488)
<value> ::= 'B' in Ax + B, value
in NR3 format
<m> ::= 1 to (# math functions)
in NR1 format
:FUNCtion<m>:OFFSet
<offset> (see
page 489)
:FUNCtion<m>:OFFSet?
(see page 489)
<offset> ::= the value at center
screen in NR3 format.
The range of legal values is
+/-10 times the current
sensitivity of the selected
function.
<m> ::= 1 to (# math functions)
in NR1 format
Table 16 :FUNCtion<m> Commands Summary (continued)
Command Query Options and Query Returns