Keysight Technologies InfiniiVision 4000 X Series User Manual

1504 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
39 Obsolete and Discontinued Commands
:DISPlay:CONNect
(see page 1610)
Command Syntax
:DISPlay:CONNect <connect>
<connect> ::= {{ 1 | ON} | {0 | OFF}}
The :DISPlay:CONNect command turns vectors on and off. When vectors are
turned on, the oscilloscope displays lines connecting sampled data points. When
vectors are turned off, only the sampled data is displayed.
Query Syntax
:DISPlay:CONNect?
The :DISPlay:CONNect? query returns the current state of the vectors setting.
Return Format
<connect><NL>
<connect> ::= {1 | 0}
See Also • ":DISPlay:VECTors" on page 425
NOTE
The :DISPlay:CONNect command is an obsolete command provided for compatibility to
previous oscilloscopes. Use the :DISPlay:VECTors command (see page 425) instead.

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Sample Rate	up to 5 GSa/s
Display	12.1-inch capacitive touch screen
Form Factor	Benchtop
Vertical Resolution	8 bits
FFT	Yes
Channels	2 or 4 analog channels
Waveform Update Rate	Up to 1, 000, 000 waveforms per second
Connectivity	USB, LAN
Input Impedance	1 MΩ
Trigger Types	Edge, Pulse Width, Pattern
Operating Temperature	0 to 50 °C