Keysight Technologies InfiniiVision 4000 X Series User Manual

:SEARch Commands 32
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1203
:SEARch:SERial:I2S:AUDio
(see page 1610)
Command Syntax
:SEARch:SERial:I2S:AUDio <audio_ch>
<audio_ch> ::= {RIGHt | LEFT | EITHer}
The :SEARch:SERial:I2S:AUDio command specifies the channel on which to search
for I2S events: right, left, or either channel.
Query Syntax
:SEARch:SERial:I2S:AUDio?
The :SEARch:SERial:I2S:AUDio? query returns the current channel setting.
Return Format
<audio_ch><NL>
<audio_ch> ::= {RIGH | LEFT | EITH}
See Also • Chapter 32, “:SEARch Commands,” starting on page 1149
• ":SEARch:SERial:I2S:MODE" on page 1204

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English