:SYSTem Commands 33
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1273
:SYSTem:RLOGger:FNAMe
(see page 1610)
Command Syntax
:SYSTem:RLOGger:FNAMe <file_name>
<file_name> ::= quoted ASCII string
The :SYSTem:RLOGger:FNAMe command specifies the remote command log file
name.
Because log files are ASCII text files, the ".txt" extension is automatically added to
the name specified.
Query Syntax
:SYSTem:RLOGger:FNAMe?
The :SYSTem:RLOGger:FNAMe? query returns the remote command log file name.
Return Format
<file_name><NL>
See Also • ":SYSTem:RLOGger" on page 1270
• ":SYSTem:RLOGger:DESTination" on page 1271
• ":SYSTem:RLOGger:DISPlay" on page 1272
• ":SYSTem:RLOGger:STATe" on page 1274
• ":SYSTem:RLOGger:TRANsparent" on page 1275
• ":SYSTem:RLOGger:WMODe" on page 1276
To Next Page
Loading...
