Keysight Technologies InfiniiVision 4000 X Series User Manual

:DISPlay Commands 16
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 411
:DISPlay:CLEar
(see page 1610)
Command Syntax
:DISPlay:CLEar
The :DISPlay:CLEar command clears the display and resets all associated
measurements. If the oscilloscope is stopped, all currently displayed data is
erased. If the oscilloscope is running, all of the data for active channels and
functions is erased; however, new data is displayed on the next acquisition.
See Also • "Introduction to :DISPlay Commands" on page 403

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English