Keysight Technologies InfiniiVision 4000 X Series User Manual

1222 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
32 :SEARch Commands
:SEARch:SERial:LIN:SYMBolic:SIGNal
(see page 1610)
Command Syntax
:SEARch:SERial:LIN:SYMBolic:SIGNal <name>
<name> ::= quoted ASCII string
The :SEARch:SERial:LIN:SYMBolic:SIGNal command specifies the signal to search
for when LIN symbolic data has been loaded (recalled) into the oscilloscope and
the LIN serial search mode is set to FSIGnal.
Query Syntax
:SEARch:SERial:LIN:SYMBolic:SIGNal?
The :SEARch:SERial:LIN:SYMBolic:SIGNal? query returns the specified signal.
Return Format
<name><NL>
<name> ::= quoted ASCII string
See Also • ":RECall:LDF[:STARt]" on page 815
• ":SEARch:SERial:LIN:MODE" on page 1217
• ":SEARch:SERial:LIN:SYMBolic:FRAMe" on page 1221
• ":SEARch:SERial:LIN:SYMBolic:VALue" on page 1223

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English