Keysight Technologies InfiniiVision 4000 X Series User Manual

:SBUS<n> Commands 31
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1131
:SBUS<n>:USB:TRIGger:PID:HANDshake
(see page 1610)
Command Syntax
:SBUS<n>:USB:TRIGger:PID:HANDshake <pid>
<pid> ::= {ACK | NAK | STALl | NYET}
The :SBUS<n>:USB:TRIGger:PID:HANDshake command specifies the USB
handshake PID to trigger on for the selected bus.
The specified PID does not include the PID check value, which is specified using
the :SBUS<n>:USB:TRIGger:PIDCheck command.
The HANDshake USB trigger mode can be selected using the
:SBUS<n>:USB:TRIGger command.
Query Syntax
:SBUS<n>:USB:TRIGger:PID:HANDshake?
The :SBUS<n>:USB:TRIGger:PID:HANDshake? query returns the specified
handshake PID.
Return Format
<pid><NL>
<pid> ::= {ACK | NAK | STAL | NYET}
See Also • ":SBUS<n>:USB:TRIGger:PCHeck" on page 1129
• ":SBUS<n>:USB:TRIGger" on page 1120

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English