Keysight Technologies InfiniiVision 4000 X Series

Commands Quick Reference 5
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 105
:ACQuire:POINts[:ANAL
og]:AUTO {{0 | OFF} |
{1 | ON}} (see
page 309)
:ACQuire:POINts[:ANAL
og]:AUTO? (see
page 309)
{0 | 1}
:ACQuire:RSIGnal
<ref_signal_mode>
(see page 310)
:ACQuire:RSIGnal?
(see page 310)
<ref_signal_mode> ::= {OFF | OUT
| IN}
:ACQuire:SEGMented:AN
ALyze (see page 311)
n/a n/a
:ACQuire:SEGMented:CO
UNt <count> (see
page 312)
:ACQuire:SEGMented:CO
UNt? (see page 312)
<count> ::= an integer from 2 to
1000 in NR1 format
:ACQuire:SEGMented:IN
Dex <index> (see
page 313)
:ACQuire:SEGMented:IN
Dex? (see page 313)
<index> ::= an integer from 1 to
1000 in NR1 format
:ACQuire:SRATe[:ANALo
g] <rate> (see
page 316)
:ACQuire:SRATe[:ANALo
g]? (see page 316)
<rate> ::= {AUTO | <sample_rate>}
<sample_rate> ::= desired analog
sample rate in NR3 format
:ACQuire:SRATe[:ANALo
g]:AUTO {{0 | OFF} |
{1 | ON}} (see
page 317)
:ACQuire:SRATe[:ANALo
g]:AUTO? (see
page 317)
{0 | 1}
:ACQuire:TYPE <type>
(see page 318)
:ACQuire:TYPE? (see
page 318)
<type> ::= {NORMal | AVERage |
HRESolution | PEAK}
Table 4 :ACQuire Commands Summary (continued)
Command Query Options and Query Returns