:WAVeform Commands 36
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1409
The :WAVeform:POINts:MODE? query returns the current points mode. Setting the
points mode will affect what data is transferred. See the discussion above.
Return Format
<points_mode><NL>
<points_mode> ::= {NORMal | MAXimum | RAW}
See Also • "Introduction to :WAVeform Commands" on page 1396
• ":WAVeform:DATA" on page 1403
• ":ACQuire:POINts[:ANALog]" on page 308
• ":WAVeform:VIEW" on page 1424
• ":WAVeform:PREamble" on page 1410
• ":WAVeform:POINts" on page 1406
• ":TIMebase:MODE" on page 1283
• ":ACQuire:TYPE" on page 318
• ":ACQuire:COUNt" on page 304
To Next Page
Loading...
