Keysight Technologies InfiniiVision 4000 X Series

154 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
5 Commands Quick Reference
:POWer:ENABle {{0 |
OFF} | {1 | ON}} (see
page 734)
:POWer:ENABle? (see
page 734)
{0 | 1}
:POWer:HARMonics:APPL
y (see page 735)
n/a n/a
n/a :POWer:HARMonics:DATA
? (see page 736)
<binary_block> ::=
comma-separated data with
newlines at the end of each row
:POWer:HARMonics:DISP
lay <display> (see
page 737)
:POWer:HARMonics:DISP
lay? (see page 737)
<display> ::= {TABLe | BAR | OFF}
n/a :POWer:HARMonics:FAIL
count? (see page 738)
<count> ::= integer in NR1 format
:POWer:HARMonics:LINE
<frequency> (see
page 739)
:POWer:HARMonics:LINE
? (see page 739)
<frequency> ::= {F50 | F60 | F400
| AUTO}
n/a :POWer:HARMonics:POWe
rfactor? (see
page 740)
<value> ::= Class C power factor
in NR3 format
:POWer:HARMonics:RPOW
er <source> (see
page 741)
:POWer:HARMonics:RPOW
er? (see page 741)
<source> ::= {MEASured | USER}
:POWer:HARMonics:RPOW
er:USER <value> (see
page 742)
:POWer:HARMonics:RPOW
er:USER? (see
page 742)
<value> ::= Watts from 1.0 to
600.0 in NR3 format
n/a :POWer:HARMonics:RUNC
ount? (see page 743)
<count> ::= integer in NR1 format
:POWer:HARMonics:STAN
dard <class> (see
page 744)
:POWer:HARMonics:STAN
dard? (see page 744)
<class> ::= {A | B | C | D}
n/a :POWer:HARMonics:STAT
us? (see page 745)
<status> ::= {PASS | FAIL |
UNTested}
n/a :POWer:HARMonics:THD?
(see page 746)
<value> ::= Total Harmonics
Distortion in NR3 format
:POWer:INRush:APPLy
(see page 747)
n/a n/a
:POWer:INRush:EXIT
(see page 748)
n/a n/a
Table 24 :POWer Commands Summary (continued)
Command Query Options and Query Returns