Keysight Technologies InfiniiVision 4000 X Series User Manual

394 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
15 :DIGital<d> Commands
Introduction to
:DIGital<d>
Commands
<d> ::= 0 to (# digital channels - 1) in NR1 format
The DIGital subsystem commands control the viewing, labeling, and positioning of
digital channels. They also control threshold settings for groups of digital
channels, or pods.
Reporting the Setup
Use :DIGital<d>? to query setup information for the DIGital subsystem.
Return Format
The following is a sample response from the :DIGital0? query. In this case, the
query was issued following a *RST command.
:DIG0:DISP 0;THR +1.40E+00;LAB 'D0';POS +0
NOTE
These commands are only valid for the MSO models.

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English