What's New 1
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 43
Changed
Commands
Command Differences
:DEMO:FUNCtion (see
page 386)
The USBPd function is now available.
:RECall:WMEMory<r>:[STARt]
(see page 819)
There is now a <data> option for recalling waveform data from the
controller PC.
:SBUS<n>:A429:SPEed (see
page 869)
The USER option is now available to select a user-defined baud
rate.
:SBUS<n>:MANChester:BAUDr
ate (see page 1002)
The minimum baud rate is changed from "2000" to "500".
:SBUS<n>:MODE (see
page 857)
The USBPd mode is now available with the USB PD serial decode
and triggering license.
:SBUS<n>:SENT:PPULse (see
page 1048)
The pause mode now, in addition supporting pause pulses off and
on, supports SENT SPC (Short PWM Code) where message events
are triggered by the master.
To Next Page
Loading...
Need help?
General
