Keysight Technologies InfiniiVision 4000 X Series - Page 51

What's New 1
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 51
Changed
Commands
Command Differences
:CALibrate:OUTPut (see
page 335)
The NFC option becomes available in the Near Field
Communication (NFC) trigger mode when the ATRigger (Arm &
Trigger) trigger event is selected.
:FUNCtion<m>:OPERation (see
page 490)
The MAXimum, MINimum, and PEAK operations are added.
:TRIGger:MODE (see
page 1308)
The NFC option is now available for setting the Near Field
Communication (NFC) trigger mode. See ":TRIGger:NFC
Commands" on page 1339.