Keysight Technologies InfiniiVision 4000 X Series User Manual

74 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
2 Setting Up
For example, to add a device:
a Select LAN instrument in the list on the left.
b Enter the oscilloscope's Hostname or IP address.
c Select the protocol.
d Select Instrument under Set Protocol.
e Click Test This VISA Address to verify the connection.
f If the connection test is successful, click Accept to add the instrument.
If the connection test is not successful, go back and verify the LAN
connections and the oscilloscope setup.

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English