Keysight Technologies InfiniiVision 4000 X Series User Manual

Commands Quick Reference 5
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 125
:MARKer:Y1Position
<position>[suffix]
(see page 542)
:MARKer:Y1Position?
(see page 542)
<position> ::= Y1 cursor position
value in NR3 format
[suffix] ::= {V | mV | dB}
<return_value> ::= Y1 cursor
position value in NR3 format
:MARKer:Y2:DISPlay
{{0 | OFF} | {1 |
ON}} (see page 543)
:MARKer:Y2:DISPlay?
(see page 543)
<setting> ::= {0 | 1}
:MARKer:Y2Position
<position>[suffix]
(see page 544)
:MARKer:Y2Position?
(see page 544)
<position> ::= Y2 cursor position
value in NR3 format
[suffix] ::= {V | mV | dB}
<return_value> ::= Y2 cursor
position value in NR3 format
n/a :MARKer:YDELta? (see
page 545)
<return_value> ::= Y cursors
delta value in NR3 format
:MARKer:YUNits <mode>
(see page 546)
:MARKer:YUNits? (see
page 546)
<units> ::= {BASE | PERCent}
:MARKer:YUNits:USE
(see page 547)
n/a n/a
Table 19 :MARKer Commands Summary (continued)
Command Query Options and Query Returns
Table 20 :MEASure Commands Summary
Command Query Options and Query Returns
:MEASure:ALL (see
page 570)
n/a n/a
:MEASure:AREa
[<interval>][,<source
>] (see page 571)
:MEASure:AREa?
[<interval>][,<source
>] (see page 571)
<interval> ::= {CYCLe | DISPlay}
<source> ::= {CHANnel<n> |
FUNCtion<m> | MATH<m> |
WMEMory<r>}
<n> ::= 1 to (# analog channels)
in NR1 format
<m> ::= 1 to (# math functions)
in NR1 format
<r> ::= 1 to (# ref waveforms) in
NR1 format
<return_value> ::= area in
volt-seconds, NR3 format

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English