Keysight Technologies InfiniiVision 4000 X Series User Manual

1259
Keysight InfiniiVision 4000 X-Series Oscilloscopes
Programmer's Guide
33 :SYSTem Commands
Control basic system functions of the oscilloscope. See "Introduction to :SYSTem
Commands" on page 1260.
Table 150 :SYSTem Commands Summary
Command Query Options and Query Returns
:SYSTem:DATE <date>
(see page 1261)
:SYSTem:DATE? (see
page 1261)
<date> ::= <year>,<month>,<day>
<year> ::= 4-digit year in NR1
format
<month> ::= {1,..,12 | JANuary |
FEBruary | MARch | APRil | MAY |
JUNe | JULy | AUGust | SEPtember
| OCTober | NOVember | DECember}
<day> ::= {1,..31}
n/a :SYSTem:DIDentifier?
(see page 1262)
n/a
:SYSTem:DSP <string>
(see page 1263)
n/a <string> ::= up to 75 characters
as a quoted ASCII string
n/a :SYSTem:ERRor? (see
page 1264)
<error> ::= an integer error code
<error string> ::= quoted ASCII
string.
See Error Messages (see
page 1549).
:SYSTem:LOCK <value>
(see page 1265)
:SYSTem:LOCK? (see
page 1265)
<value> ::= {{1 | ON} | {0 |
OFF}}
:SYSTem:PRESet (see
page 1266)
n/a See :SYSTem:PRESet (see page 1266)
:SYSTem:PROTection:LO
CK <value> (see
page 1269)
:SYSTem:PROTection:LO
CK? (see page 1269)
<value> ::= {{1 | ON} | {0 |
OFF}}

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English