Keysight Technologies InfiniiVision 4000 X Series

150 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
5 Commands Quick Reference
:MTESt:AMASk:XDELta
<value> (see page 674)
:MTESt:AMASk:XDELta?
(see page 674)
<value> ::= X delta value in NR3
format
:MTESt:AMASk:YDELta
<value> (see page 675)
:MTESt:AMASk:YDELta?
(see page 675)
<value> ::= Y delta value in NR3
format
n/a :MTESt:COUNt:FWAVefor
ms? [CHANnel<n>] (see
page 676)
<failed> ::= number of failed
waveforms in NR1 format
:MTESt:COUNt:RESet
(see page 677)
n/a n/a
n/a :MTESt:COUNt:TIME?
(see page 678)
<time> ::= elapsed seconds in NR3
format
n/a :MTESt:COUNt:WAVeform
s? (see page 679)
<count> ::= number of waveforms
in NR1 format
:MTESt:DATA <mask>
(see page 680)
:MTESt:DATA? (see
page 680)
<mask> ::= data in IEEE 488.2 #
format.
:MTESt:DELete (see
page 681)
n/a n/a
:MTESt:ENABle {{0 |
OFF} | {1 | ON}} (see
page 682)
:MTESt:ENABle? (see
page 682)
{0 | 1}
:MTESt:LOCK {{0 |
OFF} | {1 | ON}} (see
page 683)
:MTESt:LOCK? (see
page 683)
{0 | 1}
:MTESt:RMODe <rmode>
(see page 684)
:MTESt:RMODe? (see
page 684)
<rmode> ::= {FORever | TIME |
SIGMa | WAVeforms}
:MTESt:RMODe:FACTion:
MEASure {{0 | OFF} |
{1 | ON}} (see
page 685)
:MTESt:RMODe:FACTion:
MEASure? (see
page 685)
{0 | 1}
:MTESt:RMODe:FACTion:
PRINt {{0 | OFF} | {1
| ON}} (see page 686)
:MTESt:RMODe:FACTion:
PRINt? (see page 686)
{0 | 1}
:MTESt:RMODe:FACTion:
SAVE {{0 | OFF} | {1
| ON}} (see page 687)
:MTESt:RMODe:FACTion:
SAVE? (see page 687
)
{0 | 1}
:MTESt:RMODe:FACTion:
STOP {{0 | OFF} | {1
| ON}} (see page 688)
:MTESt:RMODe:FACTion:
STOP? (see page 688)
{0 | 1}
Table 22 :MTESt Commands Summary (continued)
Command Query Options and Query Returns