Keysight Technologies InfiniiVision 4000 X Series - Page 228

228 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
6 Common (*) Commands
*OPC (see page 240) *OPC? (see page 240) ASCII "1" is placed in the output
queue when all pending device
operations have completed.
n/a *OPT? (see page 241) <return_value> ::= 0,0,<license
info>
<license info> ::= <All field>,
<reserved>, <reserved>, <MSO>,
<reserved>, <Memory>,
<Low Speed Serial>,
<Automotive Serial>,
<FlexRay Serial>,
<Frequency Response Analysis>,
<Power Measurements>,
<RS-232/UART Serial>,
<Segmented Memory>, <Mask Test>,
<reserved>, <Bandwidth>,
<reserved>, <reserved>,
<reserved>, <reserved>,
<reserved>, <reserved>,
<I2S Serial>, <reserved>,
<Educator's Kit>,
<Waveform Generator>,
<MIL-1553/ARINC 429 Serial>,
<Extended Video>,
<Advanced Math>, <reserved>,
<reserved>, <reserved>,
<Digital Voltmeter>, <reserved>,
<Spectrum Visualizer>,
<reserved>,
<USB 2.0 Low/Full Speed>,
<USB 2.0 High Speed>,
<USB 2.0 Signal Quality Analysis
>, <Remote Command Logging>,
<reserved>, <SENT Serial>,
<CAN FD Serial>, <CXPI Serial>,
<NFC Trigger>, <reserved>,
<reserved>, <reserved>,
<Manchester/NRZ Serial>,
<USB PD Serial>, <reserved>,
<Automotive Software>,
<General Purpose Software>,
<Aerospace Software>,
<Power Supply Test Software>,
<USB Test Software>,
<Near Field Communications (NFC)
Software>, <Software Bundle>
Table 78 Common (*) Commands Summary (continued)
Command Query Options and Query Returns