Keysight Technologies InfiniiVision 4000 X Series - Page 241

Common (*) Commands 6
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 241
*OPT (Option Identification)
(see page 1610)
Query Syntax
*OPT?
The *OPT? query reports the options installed in the instrument. This query returns
a string that identifies the module and its software revision level.
Return Format
0,0,<license info>
<license info> ::= <All field>, <reserved>, <reserved>, <MSO>,
<reserved>, <Memory>, <Low Speed Serial>,
<Automotive Serial>, <FlexRay Serial>, <Frequency Response Analysis>,
<Power Measurements>, <RS-232/UART Serial>, <Segmented Memory>,
<Mask Test>, <reserved>, <Bandwidth>, <reserved>, <reserved>,
<reserved>, <reserved>, <reserved>, <reserved>, <I2S Serial>,
<reserved>, <Educator's Kit>, <Waveform Generator>,
<MIL-1553/ARINC 429 Serial>, <Extended Video>, <Advanced Math>,
<reserved>, <reserved>, <reserved>, <Digital Voltmeter>, <reserved>,
<Spectrum Visualizer>, <reserved>, <USB 2.0 Low/Full Speed>,
<USB 2.0 High Speed>, <USB 2.0 Signal Quality Analysis>,
<Remote Command Logging>, <reserved>, <SENT Serial>, <CAN FD Serial>,
<CXPI Serial>, <NFC Trigger>, <reserved>, <reserved>, <reserved>,
<Manchester/NRZ Serial>, <USB PD Serial>, <reserved>,
<Automotive Software>, <General Purpose Software>,
<Aerospace Software>, <Power Supply Test Software>,
<USB Test Software>, <Near Field Communications (NFC) Software>,
<Software Bundle>
<All field> ::= {0 | All}
<reserved> ::= 0
<MSO> ::= {0 | MSO}
<Memory> ::= {0 | MEMUP}
<Low Speed Serial> ::= {0 | EMBD}
<Automotive Serial> ::= {0 | AUTO}
<FlexRay Serial> ::= {0 | FLEX}
<Frequency Response Analysis> ::= {0 | FRA}
<Power Measurements> ::= {0 | PWR}
<RS-232/UART Serial> ::= {0 | COMP}
<Segmented Memory> ::= {0 | SGM}
<Mask Test> ::= {0 | MASK}
<Bandwidth> ::= {0 | BW50}
<I2S Serial> ::= {0 | AUDIO}
<Educator's Kit> ::= {0 | EDK}