EasyManua.ls Logo

Keysight Technologies InfiniiVision 4000 X Series

Keysight Technologies InfiniiVision 4000 X Series
1762 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
242 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
6 Common (*) Commands
<Waveform Generator> ::= {0 | WAVEGEN}
<MIL-1553/ARINC 429 Serial> ::= {0 | AERO}
<Extended Video> ::= {0 | VID}
<Advanced Math> ::= {0 | ADVMATH}
<Digital Voltmeter> ::= {0 | DVM}
<Spectrum Visualizer> ::= {0 | OSV}
<USB 2.0 Low/Full Speed> ::= {0 | USBFL}
<USB 2.0 High Speed> ::= {0 | USBH}
<USB 2.0 Signal Quality Analysis> ::= {0 | USBSQ}
<Remote Command Logging> ::= {0 | RML}
<SENT Serial> ::= {0 | SENSOR}
<CAN FD Serial> ::= {0 | CANFD}
<CXPI Serial> ::= {0 | CXPI}
<NFC Trigger> ::= {0 | NFC}
<Manchester/NRZ Serial> ::= {0 | NRZ}
<USB PD Serial> ::= {0 | USBPD}
<Automotive Software> ::= {0 | D4000AUTA}
<General Purpose Software> ::= {0 | D4000GENA}
<Aerospace Software> ::= {0 | D4000AERA}
<Power Supply Test Software> ::= {0 | D4000PWRA}
<USB Test Software> ::= {0 | D4000USBA}
<Near Field Communications (NFC) Software> ::= {0 | D4000NFCA}
<Software Bundle> ::= {0 | D4000BDLA}
The <MSO> field indicates whether the unit is a mixed-signal
oscilloscope.
The *OPT? query returns the following:
See Also "Introduction to Common (*) Commands" on page 231
"*IDN (Identification Number)" on page 238
Module Module Id
No modules attached 0,0,0,0,0,0,MEMUP,0,0,0,0,0,SGM,0,0,0,0,0,0,0,0,0,0,0,0,ADVMATH,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0

Table of Contents

Related product manuals