Keysight Technologies InfiniiVision 4000 X Series User Manual

What's New 1
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 41
Obsolete
Commands
:MEASure:DELay (see
page 580)
You are now able to perform delay measurements on digital input
channels.
:MEASure:NPULses (see
page 598)
You are now able to perform delay measurements on digital input
channels.
:MEASure:PPULses (see
page 605)
You are now able to perform delay measurements on digital input
channels.
:MEASure:TEDGe (see
page 623)
There is now a command to install the measurement on the
oscilloscope's display and there is a new optional <slope>
parameter.
*OPT? (see page 241) New license information is possible in the returned string.
:WAVeform:VIEW (see
page 1424)
The ALL parameter is available when Digitizer mode is enabled to
specify a waveform data view view that includes all captured data,
which may extend beyound the edges of the oscilloscope's main
waveform display area depending on the settings for sample rate,
memory depth, and horizontal time/div.
Command Differences
Obsolete Command Current Command Equivalent Behavior Differences
:MEASure:VTIMe (see
page 1531)
:MEASure:YATX (see
page 640)
With :MEASure:YATX, there is a
command for installing the
measurement on the
oscilloscope's display.
:MEASure:VTIMe had no
command, only a query.

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English