549
Keysight InfiniiVision 4000 X-Series Oscilloscopes
Programmer's Guide
24 :MEASure Commands
Select automatic measurements to be made and control time markers. See
"Introduction to :MEASure Commands" on page 568.
Table 110 :MEASure Commands Summary
Command Query Options and Query Returns
:MEASure:ALL (see
page 570)
n/a n/a
:MEASure:AREa
[<interval>][,<source
>] (see page 571)
:MEASure:AREa?
[<interval>][,<source
>] (see page 571)
<interval> ::= {CYCLe | DISPlay}
<source> ::= {CHANnel<n> |
FUNCtion<m> | MATH<m> |
WMEMory<r>}
<n> ::= 1 to (# analog channels)
in NR1 format
<m> ::= 1 to (# math functions)
in NR1 format
<r> ::= 1 to (# ref waveforms) in
NR1 format
<return_value> ::= area in
volt-seconds, NR3 format
To Next Page
Loading...
