Keysight Technologies InfiniiVision 4000 X Series

1298 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
35 :TRIGger Commands
:TRIGger:MODE <mode>
(see page 1308)
:TRIGger:MODE? (see
page 1308)
<mode> ::= {EDGE | GLITch |
PATTern | TV | DELay | EBURst |
OR | RUNT | SHOLd | TRANsition |
SBUS{1 | 2}}
<return_value> ::= {<mode> |
<none>}
<none> ::= query returns "NONE"
if the :TIMebase:MODE is ROLL or
XY
:TRIGger:NREJect {{0
| OFF} | {1 | ON}}
(see page 1309)
:TRIGger:NREJect?
(see page 1309)
{0 | 1}
:TRIGger:SWEep
<sweep> (see
page 1310)
:TRIGger:SWEep? (see
page 1310)
<sweep> ::= {AUTO | NORMal}
Table 152 General :TRIGger Commands Summary (continued)
Command Query Options and Query Returns